errors in Monitor log

Post Reply
jgdoke
Posts: 167
Joined: Wed Jul 14, 2004 10:52 am

errors in Monitor log

Post by jgdoke »

I found these in the monitor log. the line about user public is in each time it crawls.

006 2008-03-14 14:40:08 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout sending data to rockwellautomation.custhelp.com:80 in the function htbuf_flushnblk
006 2008-03-14 11:09:13 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout reading from rockwellautomation.custhelp.com:80 in the function htbuf_readnblk
006 2008-03-14 11:08:53 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout reading from rockwellautomation.custhelp.com:80 in the function htbuf_readnblk
006 2008-03-14 11:02:48 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout reading from rockwellautomation.custhelp.com:80 in the function htbuf_readnblk
006 2008-03-14 11:02:28 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout reading from rockwellautomation.custhelp.com:80 in the function htbuf_readnblk
006 2008-03-14 11:02:08 /usr/local/morph3/texis/scripts/dowalk:5032: Timeout reading from rockwellautomation.custhelp.com:80 in the function htbuf_readnblk
100 2008-03-14 10:58:11 /usr/local/morph3/texis/scripts/dowalk:2727: User PUBLIC has been added without a password.
User avatar
mark
Site Admin
Posts: 5513
Joined: Tue Apr 25, 2000 6:56 pm

errors in Monitor log

Post by mark »

Those look like vortex.log not monitor.log.
The User PUBLIC msg is normal upon every database creation (mode new walk).
The others are timeouts trying to fetch a page from the mentioned server. Those should also show up as walk errors.
User avatar
John
Site Admin
Posts: 2597
Joined: Mon Apr 24, 2000 3:18 pm
Location: Cleveland, OH
Contact:

errors in Monitor log

Post by John »

It is possible that the server is timing out the connections if the appliance is crawling too fast. You can use the crawl delay to slow down the crawl if that is the case.
John Turnbull
Thunderstone Software
Post Reply