Page 1 of 2
Rewalk on schedule doesn't work
Posted: Wed Aug 25, 2004 4:01 am
by markell
I was setting up a daily Rewalking (on schedule) in the configuration menu "All Waking Settings", but it doesn't seem to work. If I start the dowalk manually it's working without problems.
I checked the vortex.log and found the following log-messages:
000 Aug 24 04:00:01 Could not open SYSTABLES in the function ddopen
000 Aug 24 04:00:01 Could not connect to . in the function openntexis
000 Aug 25 04:00:01 Could not open SYSTABLES in the function ddopen
... but, what does this mean?
My Environment: Webinator 4.2 / Apache 1.3 / Windows 2000
Thanks for advice,
Roger
Rewalk on schedule doesn't work
Posted: Wed Aug 25, 2004 10:00 am
by mark
Did you get any messages in the walk status?
Unschedule the walk by setting frequency to none and updating. The try scheduling it again. Watch the top of the page. There should be a notice in gray background indicating what happened.
Also make sure the monitor is running as a service. From a dos prompt run
INSTALLDIR\monitor -U
INSTALLDIR\monitor -k
INSTALLDIR\monitor -R
Rewalk on schedule doesn't work
Posted: Wed Aug 25, 2004 10:24 am
by markell
In the walking status I just have the information about the last walk I started manually.
After unschedule and reschedule I get "Rewalk scheduled for "daily at 4" " in the grey banner at the top of the page.
The monitor is running as service, unfortunately I checked it in the services-menu after I run the mentioned "monitor" calls, so I'm not sure if it was running as service before ... I'll check tomorrow if it was rebuilding the index...
Rewalk on schedule doesn't work
Posted: Thu Aug 26, 2004 7:36 am
by markell
It still isn't working. It seems to be still the same problem ... I appended also parts from the monitor.log, maybe this gives more information.
vortex.log
000 Aug 26 04:00:00 Could not open SYSTABLES in the function ddopen
000 Aug 26 04:00:00 Could not connect to . in the function openntexis
monitor.log:
200 Aug 26 04:00:00 Database Monitor on C:\WINNT\system32 starting (pid 1820)
000 Aug 26 04:00:00 Could not open SYSTABLES in the function ddopen
000 Aug 26 04:00:00 Failed to open database C:\WINNT\system32 in the function Main
200 Aug 26 04:00:00 Database Monitor on C:\WINNT\system32 exiting due to error (pid 1820)
100 Aug 26 04:01:22 Job "C:\Program Files\Thunderstone Software\Webinator\texis.exe" -sched iscmdln profile=Intranet_Testsite what=sched "c:\program files\apache group\apache\htdocs\webinator\dowalk/dispatch.txt" returned exit code 1
200 Aug 26 04:02:45 Contacting license server
006 Aug 26 04:03:08 Can't send data to ls.thunderstone.com:80 in the function htbuf_flushnblk
000 Aug 26 04:03:08 Could not contact license server
200 Aug 26 04:09:15 Texis Monitor version 04.00.1016233329 starting (pid 1556)
200 Aug 26 04:09:15 Starting Dispatcher in the function SVmain
015 Aug 26 04:09:15 Texis Monitor pid 1520 already running (pid 1556)
200 Aug 26 04:09:15 Texis Monitor exiting due to error (pid 1556)
Something else I recognized, maybe this has to do with the other problem. It seems that Webinator couldn't connect to the license-server.
monitor.log:
200 Aug 26 04:18:12 Contacting license server
006 Aug 26 04:18:35 Can't send data to ls.thunderstone.com:80 in the function htbuf_flushnblk
000 Aug 26 04:18:35 Could not contact license server
This happens every 15 minute. And yes, it's a commercial version we bought ...
The files license.did end liceens.key are in the Webinator-directory.
I tried to ping to server, this works. Has something else changed at the license-server? Because we have an "older" version (Webinator 4.2, purchased March 2002).
Thanks for advice,
Roger
Rewalk on schedule doesn't work
Posted: Mon Aug 30, 2004 2:15 pm
by John
What is the output of texis -License? Maybe the default database is not set correctly?
Rewalk on schedule doesn't work
Posted: Tue Aug 31, 2004 9:24 am
by markell
... could the problem with the license-server have effects on the "rewalk on schedule"-problem? I get still the log-messages about the problems with "SYSTABLES in the function ddopen" (see above).
output of texis -License:
Texis Web Script (Vortex) Copyright (c) 1996-2002 Thunderstone - EPI, Inc.
Commercial Webinator Version 4.00.1016233329 of Mrz 16, 2002 (i686-intel-winnt-32)
License Information
Current time is: Aug 31 2004 08:11:26 W. Europe Daylight Time
Init since boot: Aug 27 2004 14:35:44 W. Europe Daylight Time
License created: Aug 23 2004 08:36:36 W. Europe Daylight Time
License expires: never
License verified: never
Last verify try: Aug 31 2004 08:11:16 W. Europe Daylight Time
Maximum version: Mrz 30 2002 05:59:59 W. Europe Standard Time
Serial number: 2571
Current hits a day: 21 since Aug 30 2004 08:38:07 W. Europe Daylight Time
Previous days: Aug 29: 2 Aug 28: 2 Aug 27: 10 Aug 26: 74 Aug 25: 13 Aug 24: 20 Aug 23: 452
Highest hits a day: 452
Maximum hits a day: 10,000
Current table rows: 0
Maximum table rows: 20,000
Current table size: 0
Maximum table size: unlimited
Current database rows: 0
Maximum database rows: unlimited
Current database size: 0
Maximum database size: unlimited
Current total rows: 0
Maximum total rows: unlimited
Current total size: 0
Maximum total size: unlimited
Flags: Non-intranetable Auto growth
Texis flags: Index Trig Del Upd Ins Sel Grant Revoke Viol. no create No anytotx
Vortex flags: Texis name Env check Comment (c) Visible (c) Create Webinator tables
Texis monitor process: pid 1408
Highest concurrent users since init: 2 at Aug 30 2004 16:48:00 W. Europe Daylight Time
Concurrent users in the past minute: 1
Defaults
Equivs path: builtin
User equivs: C:\Program Files\Thunderstone Software\Webinator/eqvsusr
Vortex log: C:\Program Files\Thunderstone Software\Webinator/texis/vortex.log
Database: C:\Program Files\Thunderstone Software\Webinator/texis/testdb
Vortex script: C:\Program Files\Thunderstone Software\Webinator/texis/testdb/index
Rewalk on schedule doesn't work
Posted: Tue Aug 31, 2004 9:54 am
by John
No. The problem appears to be related to the database it is trying to open. It looks from vortex.log as if it is trying to open ".", the current directory, which from monitor.log appears to be c:\winnt\system32
Have you changed the dowalk script, and what data directory does the Intranet_Testsite use?
Rewalk on schedule doesn't work
Posted: Tue Aug 31, 2004 10:06 am
by markell
No, I haven't changed the dowalk-script, or just replaced with the newest one on the homepage (because of an other problem).
Do I have to change something in the dowalk-script? If yes, what do I have to do if I have two profiles? I guess both would use this dowalk-script (right?).
The data directory for "Intranet_Testsite" is the default one, "C:\Program Files\Thunderstone Software\Webinator/texis/default"
Rewalk on schedule doesn't work
Posted: Tue Aug 31, 2004 2:42 pm
by mark
You mention replacing dowalk with the one from the website. You didn't try to install a version 5 script did you? You need version 4 scripts from
http://www.thunderstone.com/texis/site/ ... ample.html
You shouldn't have to modify dowalk unless you've made customizations you want to keep. One dowalk script manages all of the profiles.
Rewalk on schedule doesn't work
Posted: Wed Sep 01, 2004 6:53 am
by markell
Yes, I took the script from that webpage, not a version 5 one.
As I understood from Johns respond, the "Rewalk on schedule" doesn't find the database in the specific (in my case the current) directory. Could or do I have to configure the location of the database somewhere?
And, is there a difference between the manually started dowalk-script and the one on schedule?